Rotary screen is a vibrating screen with circular motion track, which has the advantages of high speed, high screening accuracy and wide range. Compared with the ordinary sieve machine of the same specification, it has greater processing capacity and higher screening efficiency. In order to avoid the failure of the dump screen in use, we should maintain it in daily operation. So, how to maintain the rotary screen?
Daily maintenance of trommel screen：
1.Use the trommel screen to do a good job in lubricating the supporting bearing part of the reducer.
2.The grease used for the rotary screen bearing is calcium based grease, and the reducer is lubricated with oil regularly.
3.Before leaving the factory, the roller screen needs to be filled with grease at all lubrication parts and the lubrication cycle should be determined according to the specific use conditions. The equipment is equipped with two lubricating parts, which are on the bearing pedestal at the head and tail.
4.It is forbidden to adjust the equipment during operation to avoid dangerous accidents.
6.After running for a period of time, the roller screen must open the dust cover to check whether the screen is damaged. If it is damaged, repair or replace the screen, otherwise the product quality will be affected.
7.The solution to the heat bearing problem of the roller screen shaft is that when the vibration speed of the exciter slows down and the bearing temperature rises, the operator needs to stop and check the screen machine immediately to check the problem in time, so as to ensure the normal operation of the linear screen.
Looking for a quote for product? Please click here and fill out the quote form so we have all the information needed to provide you with an accurate quote.
For all other inquiries, use the contact form below to send a message to LDHB. We will reply to your message shortly.
We sincerely welcome you to contact with us through demand table submission, e-mails and telephones.We will provide you with the most professional services.